Jump to content
PyroForum.nl

Mortars


Blaf

Recommended Posts

Posted

Hello to all!

OK, I have to admit, I already thought about HDPE tubing and visited several shops asking for prices. They were so high that I gave up instantly! Besides, there's no less than 4 meters pieces for sale...and I know - somewhere at some building site hundreds of beautiful tubing chunks probably rotten and wait to be collected. Meanwhile, Nick your comment on inox tubing sound luxurious, heh? No doubt they work perfectly. I just have an idea...those tubes should be detachable from the base so that they could be cleaned...like gun barrels. How about that Nick?

Blaf

Posted

Detachable, I like that idea
but you have to seal it proper, or else your explosion energy
is going the wrang way.
Besides that, it is very expensive to buy 4" cylindrical
screw-thread ( 80 euro).
In my opinion is it not necessary to do this,
Because i use that launch pipe for over 4 years now
whitout cleaning it

Posted

Nick, let me know what's the inner diameter of your inox tubing. What I have in mind is set of rather small diameter tubes forming a square shaped cluster, fixed on a piece of stabile metal shet. Those will be used as single shot Roman Candles....that's why I was playing with an idea of detachable construction...Besides, it would add a slice of importancy to entire process, wouldn't it? You know - cleaning and maintaining the gear, heh...

Blaf

Posted

Good afternoon Blaf,

Oh right, that explaines it

the inner diameter om my inox tube is approximately
90 millimeter.
and my mortars are 88 millimeter in diameter and 200 millimeter in
lenght.
my question to you Blaf is: how high does your mortar go (in meters)

Posted

Hello Nick

In fact, I don't have much experience in mortars...I have never fired any shells from it yet. So far I used to make my own Roman Candles made of cardboard tubing and they work perfectly. I'm sure that the same ballistic principles apply on mortars too. On top of that, those carboard ones wear out by the time. So, next logical step is to assemble a small metal cluster of tubing, just for a fun of it....besides they look more proffesional. As for real mortar, well, first I have to find suitable test site! Those you have are Giants compared to my modest setup. As for desired height, I never go over 15 meters with those small diameter comets.
What about your mortars? According to their size, you surely fire shells from them...what heights do you acchieve?

Blaf

Posted

Hey Blaf,

My striving is to acchive a heigt of 250 meters.
My current height is about 80 meters ( and rising) , but it wasn't easy to acchive this and certainly not with black powder.
Have you allready thought about your launch and burst mix?

Posted

Good morning Nick

What - you're talking meters? 250 m sounds too much for me....more than proffessional I might add. No, I'm not attempting to get such heights with my toys. As for fuel, I'm still on Black Powder in several granulations. Right now, I'm preparing a small set of Roman Candles with various charges for my cousines wedding party...when everything is over I'll start a new topic and post a few photos.

Hay, tell me - do you fire your mortars traditional way through the mouth of the tube or through side hole?

Blaf

Posted

Good morning Blaf,

Hay, tell me - do you fire your mortars traditional way through the mouth of the tube or through side hole?  


I always use the traditional way, a 1,20 meter high inox tube.
I've never heard from the 2nd way,
can you explain this?

Hey Blaf, is it an idea to introduce yourself in topic ( ik ben )

greetings nick,
Posted

Ah, I meant to fire mortar through a side hole - like Black Powder cannon. But don't pay too much atention on what I say as I have no experience in this.
Well, as for your idea, I'm not sure if the Mighty Gamekeeper would allow anyone to make Personal Introduction Topic..sunds like a commercal...

Blaf

Posted
Well, as for your idea, I'm not sure if the Mighty Gamekeeper would allow anyone to make Personal Introduction Topic..sunds like a commercal...  


There's allready a introduction forum, go to
( gamekeeper pyro forum index -> Ik ben )
"Ik ben" means "I'am"
You can tell a little bit of yourself if you like.
like what your interests are and so on
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hey Boem, Goed weer wat van je te lezen. Wat ik nog doe zie je hierboven. Maar het stelt weinig meer voor. Achja, binnenkort mag er helemaal niks meer. We gaan het wel meemaken. Blijf rustig je ding doen, een leuke fontijn zonder strafblad is veel beter dan een dikke shell met.
    • Wat Tyneman zegt: zo klein mogelijk maken met een hamer. Ik zou een hand-moker-tje gebruiken vanwege het gewicht en het relatieve grote slagoppervlak. Daarna door de zeef, z.n. nogmaals 'hameren', weer door de zeef, en dat herhalen zo vaak als nodig, voor je eigen gevoel. Dan drogen, dan in de ballmill. Het zal overbodig zijn te zeggen dat je het spul niet binnenshuis in een oven wil drogen die je ook voor maaltijdbereiding gebruikt, hoewel dat een persoonlijke keuze kan zijn. Ik denk dat (als het probleem niet al is opgelost) wanneer het spul mechanisch tot (zo klein mogelijke) 'deeltjes' is gereduceerd, een dag in de brandende zon, komend voorjaar, uitgespreid in een dunne laag, het nu en dan omscheppend, voldoende is alvorens het de mill in gaat. Het is overigens niet zo dat barium nitraat erg hygroscopisch is (waarmee ik niet zeg dat het niet vochtig kan zijn, wanneer niet goed opgeslagen). De hoofdreden dat het spul 'klontert' is door agglomeratie. Het spul zakt onder zijn eigen gewicht in elkaar. Om een analogie te gebruiken: doe je ogen dicht, ga terug naar je kindertijd en voel het 'zachte zand' van het strand onder je voeten. Graaf je kuil: de dichtheid van het zand wordt 20-30cm dieper al snel groter; uiteindelijk wordt 'zacht zand' (zand)steen. Het feit dat de ball mill 'kleine harde balletjes' produceert kan ook te maken hebben met hoe die geladen is (zowel met de hoeveelheid media, als de hoeveelheid 'spul', als de mill-tijd, als de rotatiesnelheid). Een goed functioneerde ball mill zou geen probleem moeten hebben deze 'kleine harde balletjes' weer tot stof te reduceren.
    • Ehm, ... de beste wensen, alsnog, mede liefhebbers (in deze bizarre tijden)! Lang geleden dat ik hier geweest ben. Ben hier eigenlijk al met al niet lang geweest, destijds; ik kwam te laat, met alle restricties m.b.t. chemicaliën die toen al hun intrede hadden gedaan. Ben (een beetje) met de hobby opgehouden. Het een 'misdadiger' zijn gaf me (uiteindelijk) alleen maar stress, wat niet de bedoeling kan zijn van een hobby. Opgehouden trouwens in die zin dat ik niets meer 'in de lucht' doe, of dingen die geluid maken: geen vuurpijlen met header, geen 2 en 3" ball shells, geen mines meer; 'knallers' om de knallers heb ik nooit gemaakt, hebben/hadden niet mijn interesse. Geen zin meer om als een dief in de nacht naar het natte bos te gaan. Heb 'alles' de deur uit gedaan; alles in die zin de dingen die je niet in bezit mag hebben, ik slaap er beter om. Heb nog wel KNO3 en S bewaard en wat metaal 'poeder' om een paar keer per jaar een fontein en sterretjes te kunnen maken; houtskool komt uit de houtkachel, zolang je die 'in dit land' nog mag gebruiken, maar dat terzijde. Blablabla. Voor wie dit leest, en nog wat 'erover' wil babbelen: wat doe jij nog?
    • Duvel! Goed te zien dat je nog leeft man!
  • Who's Online (See full list)

×
×
  • Create New...